OM8440-11 is a multimode multiband (MMMB) Power Amplifier Module (PAM) that supports 3G/4G handsets and operates efficiently in CDMA, WCDMA, TD-SCDMA, and LTE modes. The module is fully programmable through a Mobile Industry Processor Interface (MIPI). The PAM consists of a 3G/4G PA blocks for low, high, and mid-bands, and a Multi-Function Control (MFC) block, RF input/output ports internally matched to 50 ohm to reduce the number of external components. A CMOS integrated circuit uses standard MIPI controls to provide the internal MFC interface and operation. Extremely low leakage current maximizes handset standby time. The devices packaged in a small LGA package. (4.0 mm x 4.0 mm x 0.69 mm)
• Two T/R (RX) ports and 7 TX outputs
• Optimized PAE for3G/4G
• Optimized for APT DCDC operation
• Fully programmable Mobile Industry Processor Interface (MIPI) control
• Small package: 4.0 mm×4.0 mm×0.69mm, LGA 30 pad configuration
• Multiband 3G / LTE handsets
- WCDMA Bands I, II, III, IV, V, VIII, IX
- TD-SCDMA Bands 34, 39
- FDD LTE Bands 1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 28, 30
- TDD LTE Bands 38, 39, 40, 41
- CDMA2000 Bands BC0, BC01, BC04, BC06, BC010, BC015
• 3G / 4G MODULATION SCHEME
- WCDMA Voice Release 99
- HSDPA categories
- HSUPA
- HSPA+
- TD-SCDMA
- LTE 1.4, 3, 5, 10, 15, 20 MHz Channel BW
- TDD-LTE
- CDMA200
- GROUP4G MMMB PA
- FUNCTIONPhase 2, HB/MB/LB, 2HB/3MB/2LB
- PACKAGELGA 4.0×4.0×0.69mm
